Синьцзя Дунфан Электрик Технолоджи Ко., Лтд.
01
Reduce Energy Costs
Use onsite solar and stored energy to reduce high-tariff grid purchases and control peak demand.
CORE BENEFITS
Make Clean Energy, Storage and Charging Work as One
02
Overcome Grid Constraints
Battery storage supplies short-duration power support when charging demand exceeds the site’s available grid capacity.
03
Maximize Renewable Energy
Store surplus solar generation and release it when vehicles need energy later in the day.
01
Lower the Cost of Site Energy
The EMS continuously coordinates solar output, charging demand, electricity tariffs, battery SOC and grid capacity. Solar power is used first by chargers and other site loads. Surplus generation charges the battery, while low-tariff grid energy can also be stored within the site’s capacity limit. During high-price or high-load periods, the battery discharges alongside solar and the grid to reduce peak grid demand.
02
Add Charging Capacity Without Immediate Grid Expansion
When the charging load briefly exceeds available grid capacity, battery storage supplies the difference so more charging points can operate together. The EMS reads power at the grid connection and adjusts the PCS and charger output to keep grid demand within the transformer or connection limit.
03
Use More of the Solar Energy You Generate
Solar generation and vehicle charging do not always occur at the same time. The system prioritizes direct solar charging when vehicles are onsite, stores excess production when generation exceeds demand, and releases that energy in the evening, at night or whenever solar output falls.
INTEGRATED ENERGY SYSTEM
One Control Layer Across Generation, Storage and Charging
The EMS monitors solar output, battery SOC, charging load, electricity price and grid power in real time, then adjusts the direction and level of energy flow automatically.
Solar PV
Local renewable power for chargers and site loads.
Battery Storage
Stores surplus solar or off-peak grid energy.
Power Conversion
Manages bidirectional conversion between battery and AC bus.
Зарядка электромобилей
Delivers AC or DC charging within available site power.
Energy Management
Executes dispatch, peak shaving and capacity control.
SMART ENERGY DISPATCH
Dynamic Decisions Based on Real-Time Site Conditions
Dispatch is continuously optimized around solar output, battery SOC, tariffs, grid limits and vehicle demand.
Solar First
Solar supplies active chargers and site loads first. Surplus energy charges the battery or, where permitted, is exported.
Зарядка в непиковое время
The battery can charge from the grid during lower-tariff periods while total site demand remains within its limit.
Battery Peak Shaving
Stored energy supports charging peaks and reduces maximum power drawn at the grid connection.
Grid Support
The grid supplies remaining demand when solar and stored energy are insufficient, maintaining reliable charging service.
FLEXIBLE CONFIGURATIONS
Choose the Architecture That Fits Your Site
FULL INTEGRATED SOLUTION
Solar + Storage + Charging
Ideal for new industrial parks, fleet depots, commercial facilities and weak-grid locations with suitable solar resources.
- Increase onsite solar consumption
- Reduce grid purchases and peak demand
- Support weak-grid or selected off-grid designs
- Raise the share of clean energy used onsite
SITE UPGRADE
Storage + Charging
Designed for existing charging sites where grid expansion is costly or the difference between peak and off-peak tariffs is significant.
- Reduce or defer grid expansion
- Support short charging-power peaks
- Charge the battery during off-peak periods
- Upgrade existing charging infrastructure
MORE SOLUTIONS
Explore More
Wind PowerDiesel GeneratorHybrid EnergyCustom Solutions
RECOMMENDED PRODUCTS
Products for Your Charging Energy System
Final product images and information will be selected for the project configuration.
PRODUCT IMAGERecommended ratio 4:5
PRODUCT IMAGERecommended ratio 4:5
PRODUCT IMAGERecommended ratio 4:5
SYSTEM CAPABILITIES
Power Control, Platform Integration and Remote Management
01
Dynamic Power Allocation
Allocate available power across chargers according to vehicle demand, priority and site capacity.
02
Grid-Connection Control
Keep total grid demand within the transformer or connection limit in real time.
03
Zero-Export Control
Coordinate metering and inverter control where export to the public grid is not permitted.
04
Remote Monitoring & Alerts
View charger status, solar yield, battery SOC, energy use and system events from one platform.
05
Интеграция OCPP
Connect charging equipment with compatible third-party operation, monitoring and billing platforms.
06
Flexible Operating Strategies
Configure dispatch around tariffs, site load, solar forecasts and battery SOC requirements.
PROJECT DELIVERY
From Site Assessment to Long-Term Support
01
Site & Load Assessment
Review grid capacity, load profiles, fleet schedules, tariffs and solar conditions.
02
System Sizing
Define charger power, PV capacity, storage output and usable energy.
03
Strategy Configuration
Set solar priority, off-peak charging, peak shaving and zero-export logic.
04
Integration & Commissioning
Connect chargers, EMS, PCS, BMS, meters and third-party platforms.
05
Service & Support
Provide remote support and maintainable modular system design.
WHY XYDF
Support from Charger Selection to System Integration
Flexible Charger Selection
AC and DC charging options for public, fleet and industrial applications.
Intelligent Load Management
Dynamic charging-power allocation based on site capacity and vehicle demand.
Open Platform Compatibility
Mainstream OCPP support for integration with charging management platforms.
Project-Specific Support
Configuration guidance based on site loads, grid conditions and operating goals.
FREQUENTLY ASKED QUESTIONS
Planning a Solar, Storage and Charging Project
Can battery storage completely replace a grid upgrade?
It depends on the charging load profile, available grid capacity, battery output and required discharge duration. Storage can often reduce or defer an upgrade, but sustained high-power charging may still require additional grid capacity.
Does every integrated charging solution require solar PV?
No. Battery storage and charging equipment can operate as a standalone storage-and-charging system. Solar PV can be added where site conditions allow to reduce grid purchases and increase renewable-energy use.
Can chargers continue operating during a grid outage?
Only a system designed for island operation, with suitable switching equipment and sufficient stored energy, can continue supplying selected chargers or critical loads during an outage.
How are battery power and energy capacity determined?
Sizing considers the grid-power shortfall, charging-peak duration, tariff structure, solar production, cycling strategy and the required SOC reserve.
Does zero-export control remove the need for grid approval?
Usually not. A system electrically connected to the public grid must generally comply with local approval, protection, metering and power-quality requirements.
BUILD THE RIGHT SYSTEM FOR YOUR SITE
Plan Your Integrated Energy Project
Share your available grid capacity, charging demand, fleet schedule and site conditions. The XYDF team will help assess a suitable solar, storage and charging configuration.
